HOME / NEW CRUSHERS & SCREENS / CRUSHERS / IMPACT CRUSHERS
Impact crusher
SMR
SBM impact crushers type SMR are high-tech impact crushers that are characterised by high throughput rates and excellent crushing efficiency. Thanks to the symmetrical design of the machine and the rotation reversion of the crusher rotor, a uniform crushing product can be produced over the whole working life of the impact bars.
SYSTEM DATA
|
Crushing of: |
Natural stone and recycling materials |
|
Feed size: |
0 – 175 mm |
|
Feed capacity: |
50 – 250 tph |
|
Total weight: |
8.000 – 14.900 kg |
Get the full product details
Fields of applications
- To crush medium-hard to hard materials such as limestone, dolomite, gravel, hard coal and recycling materials without foreign materials
- For a high percentage of grain in sand or stone chips
- For a low filler content in the sand
- To obtain a uniform crushed product over the working life of the impact bars
- For abrasive materials due to the maximum utilisation factor of the wear parts
- To produce high-quality products with very good grain form
- For operation in open or closed circuit when a very high crushing rate is required
- In tertiary crushing to obtain high-quality final products
TECHNICAL DATA
|
Type |
Feed size class di - Di (mm) |
Feed size maximal max. (mm) |
Throughput capacity (tph) |
Drive capacity (kW) |
Reduction ratio up to |
Typical products (mm) |
|---|---|---|---|---|---|---|
|
SMR 10-05-4 |
0 – 125 |
150 x 125 x 100 |
50 - 100 |
55 - 132 |
1 : 15 |
0 – 22; 0 – 32 |
|
SMR 10-10-4 |
0 - 125 |
150 x 125 x 100 |
100 -200 |
110 - 250
|
1 : 15 |
0 – 22; 0 – 32 |
|
SMR 13-07-4 |
0 - 125 |
200 x 175 x 150 |
100 – 250 |
132 - 250 |
1 : 15 |
0 – 22; 0 – 32 |
|
Type |
Inlet opening w x l (mm) |
Rotor diameter (mm) |
Rotor speed |
Rotor velocity (m/s) |
Impact bar weight |
Weight (kg) |
Airflow rate |
|---|---|---|---|---|---|---|---|
|
SMR 10-05-4 |
515 x 260 |
1.080 |
500 - 900 |
30 -50 |
4 x 100 |
8.000 |
2.900 |
|
SMR 10-10-4 |
1.015 x 260 |
1.080 |
500 - 900 |
30 -50 |
4 x 200 |
12.100 |
4.700 |
|
SMR 13-07-4 |
640 x 400 |
1.300 |
400 - 750 |
30 -50 |
4 x 185 |
14.900 |
|
Type |
Transport volume (m3) |
Length (mm) |
Width (mm) |
Height (mm) |
Adjustments of the apron |
|---|---|---|---|---|---|
|
SMR 10-05-4 |
10,8 |
3.255 |
1.580 |
2.100 |
mechanical |
|
SMR 10-05-4 |
11,5 |
3.450 |
1.580 |
2.100 |
hydraulic |
|
SMR 10-10-4 |
14,2 |
3.255 |
2.070 |
2.100 |
hydraulic |
|
SMR 10-10-4 |
15,1 |
3.455 |
2.070 |
2.100 |
hydraulic |
|
SMR 13-07-4 |
22,2 |
4.270 |
2.000 |
2.600 |
hydraulic |
|
Gap width css in (mm) |
60 |
50 |
40 |
30 |
20 |
10 |
|---|---|---|---|---|---|---|
|
SMR 10-05-4 |
100 |
95 |
90 |
70 |
60 |
50 |
|
SMR 10-10-4 |
200 |
190 |
180 |
140 |
120 |
100 |
|
SMR 13-07-4 |
200 |
190 |
180 |
140 |
120 |
100 |
*Details may vary based on application
**Weight inclusive of motor & accessories
Note: All the above technical details may vary at any time during engineering process & design development