HOME / NEW CRUSHERS & SCREENS / CRUSHERS / IMPACT CRUSHERS
IMPACT CRUSHERS
CI
SBM impact crushers type CI are high-tech impact crushers that are characterised by their simple design, good throughput rates and high crushing efficiency in tertiary crushing.
SYSTEM DATA
|
Crushing of: |
Natural stone and recyclingmaterial |
|
Feed size: |
0 – 125 mm |
|
Feed capacity: |
50 – 75 tph |
|
Total weight: |
4.900 kg |
Get the full product details
Fields of applications
- To crush medium-hard materials such as limestone, dolomite, gravel, hard coal, phosphate.
- For oversize crushing of smaller quantities
- For a low filler content in the sand
- For abrasive materials due to a high utilisation factor of wear parts
- To produce high-quality products with a good grain form
- For operation in open or closed circuit when a very high crushing rate is required
- In tertiary crushing to obtain high-quality end products
TECHNICAL DATA
|
Type |
Feed size class di - Di (mm) |
Feed size maximal max. (mm) |
Throughput capacity (tph) |
Drive capacity(kW) |
Reduction ratio up to |
Typical products (mm) |
|---|---|---|---|---|---|---|
|
CI 85-60-3 |
0 – 125 |
150 x 125 x 100 |
50 - 75 |
55 - 75 |
1 : 15 |
0 – 22; 0 - 32 |
|
Type |
Inlet opening w x l (mm) |
Rotor diameter (mm) |
Rotor speed |
Rotor velocity (m/s) |
Impact bar weight (kg) |
Weight |
Airflow rate |
|---|---|---|---|---|---|---|---|
|
CI 85-60-3 |
620 x 270 |
865 |
650 - 900 |
30 - 45 |
3 x 104 |
4.900 |
2.500 |
|
Type |
Transport volume (m3) |
Length (mm) |
Width (mm) |
Height (mm) |
Gap adjustment |
|---|---|---|---|---|---|
|
CI 85-60-3 |
6,1 |
2.266 |
1.496 |
1.800 |
mechanical |
|
Gap width css in (mm) |
60 |
50 |
40 |
30 |
20 |
15 |
|---|---|---|---|---|---|---|
|
CI 85-60-3 |
75 |
65 |
55 |
45 |
35 |
30 |
*Details may vary based on application
**Weight inclusive of motor & accessories
Note: All the above technical details may vary at any time during engineering process & design development